Call Us : 13362097170
Email Us:

Certificate Search

Energy Efficiency Testing

US DOE energy efficiency certification

Release Time:2018-10-29Reading:325Time

       The US Department of Energy (DOE) has issued DOE certification in accordance with US energy efficiency regulations, which is the source of DOE certification.
       The main purpose of DOE's DOE certification is to save energy and reduce emissions and help users save energy, so as to reduce energy consumption and reduce greenhouse effect. All products in the DOE certification category now need to meet the requirements of the latest laws and regulations.
       The US federal regulations (10 CFR 430) have clearly stated that all external power supplies entering the US market should achieve a minimum energy efficiency rating: level IV and clearly marked on the product. Not only that, but manufacturers and brands are also required to submit two important declaration documents to DOE. The first is that the product meets federal regulations for compliance with energy efficiency requirements.
The second is the product's First Certification Report. Both documents must be mailed to the US Department of Energy (DOE).
       Document preparation shall be completed in accordance with the format published by DOE, where the certificate report may be submitted to a third party on behalf of the manufacturer/brand. The information reported on the document should cover the product class, manufacturer/brand name, performance (%), power consumption (W) at no load, and rated output power (W) for each single model. Anbotek can do US DOE6 energy efficiency certification
DOE certification standards and regulations:
       US federal regulations: 10 CFR 429 and 10 CFR 430;
       Among them, 10CFR429 specifies sample selection specifications and reporting specifications;
       10CFR430 specifies test methods and compliance declaration specifications.

American Energy Star certification

Release Time:2016-12-26Reading:216Time
 1. introduction of energy star

Energy Star (Energy Star), is a dominated by the U.S. government, mainly for consumer electronics products, energy saving plans. The Energy Star Program in 1992 by the US Environmental Protection Agency (EPA) and the U.S. Department of energy (DOE) started, the purpose is to reduce energy consumption and reduce greenhouse gas emissions. The plan was Australia, Canada, Japan, Taiwan, New Zealand and the European Union adopted. The plan is voluntary, energy star standard is usually better than the federal standard for energy efficiency of 20-30%.'s early products of this program are computer information appliances, and then gradually extended to the motor, office equipment, lighting, household appliances and so on. Later expansion to the building, the United States Environmental Protection Agency in 1996 to actively promote energy star building plans by the environmental protection department to assist the voluntary participation of the industry is used to assess the status of the building energy (including lighting, air conditioning, office equipment Plan the building's energy efficiency improvement action plan and follow up operations, so some signs of the energy star can also be found in homes or industrial and commercial buildings introducing new concepts of environmental protection


2. certified product range

Computer and office equipment: such as monitors, printers, fax machines, copiers, one machine, etc.;

Household appliances and similar household products such as refrigerators, air conditioners, washing machines, televisions, video recorders, etc.;

Heating and cooling equipment: heat pumps, boilers, central air conditioning, etc.;

Large commercial buildings and newly built houses, doors and windows, etc.;

Industrial and commercial products, such as transformers, power supplies, etc.;

Lighting: home appliances, lamps, etc.;

Commercial food equipment: such as commercial ice cream machines, commercial dishwashers and so on;

Other commercial products: automatic vending machines, channel identification, etc.

Currently targeted products are: fluorescent lamps, decorative light string, LED lamps, power adapter, switching power supply, ceiling fan lights, consumer audio-visual products, battery charging equipment, printers, household appliances and other products


3. test content introduction

The test content includes: Energy Star safety, EMI, surge, noise (non energy star energy efficiency testing project) optical properties and energy efficiency test items: 1, 2 light efficiency, luminous flux, color temperature, color deviation, color rendering index of 3, the distribution of light intensity, light flux distribution area 4, chroma space uniformity 5 6, switching cycle, luminous maintenance rate of 7, 8 color maintenance, size 9, electrical parameters





EU ERP directive

Release Time:2016-12-26Reading:205Time

Introduction to the 1.ERP directive

In order to improve the energy consumption of the environmental performance of products, control of environmental pollution. The EU officially released in October 31, 2009, the ecological requirements and energy related products directive 2009/125/EC, namely ErP (Enter-realted Products) instruction "ecodesign requirements for energy related products to establish the frame Instruction >, it is EuPhoria (Enter-using Products) (2005/32/EC) of the instruction rewrite the instructions that came into effect on November 10, 2009.


2. rules for implementation

The ErP instruction is not for the product requirements of the directive, but is only a framework directive of EU. In accordance with the relevant provisions of this directive, the further development of eco design requirements for certain types of energy consuming products shall comply with the instructions, called the "rules for the implementation of (Implementing Measures), referred to as the" rules for the implementation of IM. have been promulgated and implemented as follows:


1. home office electronic and electrical equipment to shutdown power ecological design requirements (No 1275/2008) release date is December 2008, the implementation date is January 7, 2010


2. simple set-top box eco design requirements (No 107/2009) release date is February 2009, the implementation date is February 25, 2010


3. non directional household lamp ecological design requirements (No 244/2009) release date is March 2009, the implementation date is September 1, 2009


4. without integrated ballast fluorescent lamp, high intensity gas discharge lamp and its ballast and lamp ecological design requirements (No 245/2009) release date is March 2009, the implementation date is April 13, 2010


5. external power ecological design requirements (No, 278/2009) release date is April 2009, the implementation date is April 27, 2010


6. motor ecological design requirements (No, 640/2009) release date is July 2009, the implementation date is June 16, 2010


7. independent no seal circulator ecological design requirements (No, 641/2009) release date is August 2009, the implementation date is January 1, 2010


8. TV ecological design requirements (No 642/2009) release date is July 2009, the implementation date is January 7, 2010


9., household refrigeration equipment ecological design requirements (No 643/2009) release date is July 2009, the implementation date is July 1, 2010


10. No 1015/2010 (household washing machine) release date is November 2010, the implementation date is December 1, 2011


11. household dishwashers (No 1016/2010) release date is November 2010, the implementation date is December 1, 2011


12. household dryers (No 932/2012) release date is October 2012, the implementation date is November 1, 2013


13., the input power range between 125 W and 500 KW motor driven fan (No 327/2011) release date is April 2011, the implementation date is April 6, 2011


14. directional lamp, LED lamp and related equipment ecological design requirements (No 1194/2012) release date is December 2012, the implementation date is September 1, 2013


3. certified product range

The European Union stipulates that all electronic and electrical products sold in Europe must meet the requirements of ERP test or ERP certification (energy saving requirements associated with European energy consumption)

IT products: switching power supply, linear power supply, power supply, portable solar charger, USB powered lamp, fan, MP3, MP4, network camera, digital recorder, network switches, routers, U disk, USB card reader, optical fiber, optical transceiver, mobile hard disk, LCD, notebook computer and desktop computer machine, computer games, computer learning machine, machine, currency-counting machine, POS machine, printer, scanner, plotter, camera and so on.


Audio and video products: LCD TV, DVD, VCD, combination audio, radio, set top box, electronic musical instruments, multimedia player and so on


Lamps and lanterns products: energy-saving lamps, LED lamps, lighting lamps, table lamps, wall lamps, chandeliers, floor lamps, electronic transformers, fluorescent lamps, rectifiers, dimmer, T4/T5/T8 bracket lights, street lamps, garden lights and other products


Household electrical appliances: electric iron, electric cooker, electric oven, hair dryer, hair straightener, kettle, microwave oven, induction cooker, warm fan, household electric fan, lampblack machine, juicer, toaster, vacuum cleaners, washing machine, water dispenser, refrigerator and other products.


Electric tools: welding machine, AC regulated power supply, VVVF inverter, DC power supply, oscilloscope, multimeter, electronic clock, electronic watch, electronic scales and other products


Wireless products: car amplifier, car audio, car DVD, car monitor, car TV, car charger, car inverter, wireless doorbell, wireless temperature and humidity meter, wireless mouse, wireless keyboard, wireless game controller, wireless network card, wireless router, Bluetooth products, wireless remote control transmitter, FM and other products.




California CEC energy efficiency certification

Release Time:2016-12-26Reading:249Time

CEC authentication

CEC certification is in December 30, 2005 the California Energy Commission (California Energy Commission) to implement the electrical energy efficiency regulations (Appliance Efficiency Regulation). The implementation of the regulations for the purpose of saving energy, improve the efficiency of the electric products, and reduce greenhouse gas emissions.


The United States of California's energy bill -CEC (California Energy Commission s "). Energy efficiency test CEC products energy efficiency certification in 58 categories of products sold to the United States of California, mainly for electric cooker, power supply, lamps (energy-saving lamp ballast or.58) sales of electrical and electronic products in the United States of California need to do CEC energy efficiency certification. The specific requirements for the regulation of energy efficiency indicators, measuring method and plan a phased implementation. According to the external power supply AC input (AC Input external Power Supply), United States of California's energy bill, such to be sold in the United States in the territory of California, before July 1, 2007, CEC (California Energy Commission s) energy efficiency testing and certification, if you can not meet the requirements of the new standard Appliance Efficiency Regulation application device, will be prohibited from selling in the United States of California. This method in the case of switching power supply for energy The performance has special requirements, it has 2 levels, "III" and "IV", that is, the third and fourth level, it is the switching power supply no-load power consumption and efficiency of the whole machine is relatively high;


The power device is implemented in two phases:

stage Ⅰ

Brand output

Minimum energy efficiency


0.49* nameplate rated output


0.09Ln nameplate rated output +00.49




Maximum no-load power dissipation





stage Ⅱ

Brand output

Minimum energy efficiency


0.5* nameplate rated output


0.09Ln nameplate rated output +00.49




Maximum no-load power dissipation

All outputs






Australia GEMS energy efficiency certification

Release Time:2017-03-13Reading:201Time

1.GEMS introduction

From October 1, 2012 onwards, Australia formally implemented the new energy efficiency certification mark, that is, GEMS certification, used to replace the previous MEPS certification, there is no future MEPS statement, the transition period is from October 1, 2012 to September 30, 2013

In order to improve the utilization efficiency of energy products and electrical equipment industries, significantly enhance the economic and environmental benefits, Australia and New Zealand issued a greenhouse and low energy standard gauge technique (GEMS) and came into effect in October 1, 2012, the new GEMS regulations not only covers the previous policy, the minimum mandatory performance standards (MEPS).GEMS regulations for registration, in contrast to previous MEPS, the applicant can not choose an arbitrary state registered in Australia official website, it is unified to Australian Regulator registered in Australia, at the same time, a Leah state and jurisdiction, for all types of products, GEMS regulations no longer set a single registration fee, product type will be divided into four categories, the registration fee from $440 to 780 Australian dollars, registered for a period of 5 years.


2. registration fee Brief


Registration fee (AUD) category of the product
$440 Lighting, dishwashers, TV sets, set top boxes, washing machines, dryers, external power supplies
$540 Electric water heater
$670 Air conditioning, heat pumps, refrigerators, gas water heaters, electric motors
$780 Commercial freezers, display cabinets


3. product range

The following products can be sold in Australia until they are registered in australia:

Air conditioning, electric water heater, gas water heater, three-phase motor, transformer, commercial refrigerator, external power supply, set-top boxes, TV, linear fluorescent lamp ballasts, linear fluorescent lamp, self ballasted compact fluorescent lamp, incandescent lamp, low voltage lamp, refrigerator, washing machine, dryer, dishwasher.